CTR1009B

RadiCentre® Pro | 7 Slots

Direct supportCall +31 348 - 200 100Add to Quote

CTR1009B Seven Slot Modular EMC Test System

The most powerful modular test system within the RadiCentre® series. With seven available slots for Raditeq plug-in cards the RadiCentre® can be used to make complex and highly integrated EMC systems. In combination with RadiMation® the EMC engineer can create a fully automated EMC setup and effortlessly perform EMC tests and measurements.

Specifications
  • Number of Slots       : 7
  • Model type                : Desktop or 19″ rack mountable
  • Interface                    : USB and LAN
  • Cables inputs            : USB cable, IEC power cord
  • Interlock system      : 6,35mm jack plug connection to safety system disables Interlock & Interlocked laser outputs when triggered.

For further technical specifications, please refer to datasheet

Standard delivered including
  • RadiCentre Pro Including:
    • PRO2001A – ARM Processor plug-in card – USB | LAN
    • PSU1250A – Power supply plug-in card – 250W
  • IEC Power cord
  • USB Connection Cable
    Upgrade options

    All Raditeq Plug-in Cards, some examples:

    • RadiSense    The LASER powered range of EM Field Sensors (range up to 40GHz)
    • RadiField     Integrated EMC Immunity Test Solution 1 to 18 GHz
    • RadiPower   The range of power meters up to 18 GHz for EMC applications
    • RadiGen       The range of RF signal generators up to 6 GHz for EMC applications
    • RadiSwitch  To switch one, two, four or six RF signals up to 40 GHz
    Warranty

    Raditeq B.V. offers a standard warranty term of three (3) years on their products, calculated from the shipping date, under the condition that the product is registered on www.raditeq.com. For registration of the product, the customer should provide the product model, serialnumber and the responsible reseller (if applicable). If the product is not registered, a limited warranty term of one (1) year will be applicable.

    Return Material Authorization (RMA) & Warranty repair

    If a defect occurs to our product within the warranty term, a Return Material Authorization (RMA) ‘Warranty Repair’ request can be issued using the RMA link at www.raditeq.com/support. Upon receipt of the request, an RMA number will be provided. Please do not send the product without this RMA number! The defective product should be shipped to our service department at the following address:

    Raditeq B.V. – Service Department

    Vijzelmolenlaan 3

    3447GX  WOERDEN

    The Netherlands

    There will be no charge for repair services (materials or labour) within the (extended) warranty term.

    These warranty terms are not applicable to:

    • Normal wear and tear
    • Fibre optic cables
    • Products that have been improperly used
    • Products that have been used outside their specified range
    • Products that have been improperly installed and/or maintained
    • Products that have been modified without approval of Raditeq
    • Calibration and/or re-calibration of the product

    Repair services on products that are not covered by the Raditeq warranty will be charged to the customer.

    Repairs outside warranty

    If a defect is not covered under warranty, an RMA fixed-repair can be ordered on the RMA link: www.raditeq.com/support If a re-calibration is needed after repair, this calibration should be ordered separately. The calibration will be performed at the ISO17025 accredited calibration laboratories of DARE!! Calibrations, based on the applicable service code / prices.

    Warranty after repair

    For repairs outside the original warranty period, a limited warranty of six months is applicable on the performed repair. Shipping conditions are the same as with repairs that are covered within the original warranty period.

     Shipping

    The customer will need to arrange shipping and cover for the costs (like e.g. transportation costs, duties, taxes) for sending the defect product the service department of Raditeq in The Netherlands. Raditeq will arrange the courier and cover for the costs for the return shipment after repair.

    Industries