How do I connect the Interlock plug of the RadiCentre®?
The RadiCentre® (Pro) uses a hardware interlock plug (6,3mm ¼” stereo jack) which can be used as a safety interlock. The hardware interlock plug provides
3 October 2024
Raditeq News
News and much more
Raditeq always tries to improve the EMC/RF branch and will report on this and other newsworthy information to you on this page.
All Posts
When the RadiSense 10 probe needs ISO17025 calibration, is it required to send the RadiCentre + LPS2001B laser card together with the probe?What is frequency range of the RadiSense probe?
In case the calibration is being performed at KIWA dare Calibrations (ISO107205 accredited of E-field probe calibrations) this is not needed. The calibration labs at
3 October 2024
If I use a RadiSense 10 probe, do I still need to apply the X-Y-Z correction factors in the EMC test software?
No, this is not needed anymore! The RadiSense® 10 probe has the capability to store the x, y and z-axis frequency response correction data from
3 October 2024
I turned on my RadiSense® but my readings are unstable.
When starting up the the RadiSense® and measuring at low E-field levels or frequency the reading can be unstable. This is due to the internal
1 October 2024
My RadiCentre® is turned on but start Beeping and it won’t start any test
When the RadiCentre® is turned on buy a beeping sound can be heard it means that the Interlock plug has been tripped. This can be
1 October 2024
How to turn on the RadiCentre®
CTR1004 | CTR1009 | When all mains cables are connected and the mains switches are set to “ON”, simple touch the front screen of the
1 October 2024