Coupling and Decoupling networks

RadiCoupler® Series

The RadiCoupler® Series offers a complete range of high quality, fully compliant and easy-to-use Coupling and Decoupling Networks (CDN).  Raditeq offers one model for all standards! The RadiCoupler® Series is fully compliant to CISPR16, IEC61000-4-6, EN55015 and EN55035. These standards are applicable for a large range of EUT connectors. The RadiCoupler® Series sees to all of your CDN needs!

The CDN for your needs!

If you need a custom made Coupling/Decoupling Network, Raditeq is more than able to provide this to you!

The standard range of the RadiCoupler®

Raditeq delivers a complete range of high quality, fully compatible and easy to use CDNs. This makes it possible to perform fully compliant and reliably immunity tests on any type of EUT cable and corresponding connectors.

The table shows the selection of the CDN series from Raditeq.

Cable TypeCable nameApplicationConnector EUTConnector AE
MainsCPL M1 16A1 line - 16A4mm Safety Banana4mm Safety Banana
MainsCPL M2 16A2 line - 16A4 mm Safety Banana4 mm Safety Banana
MainsCPL M3 16A3 line - 16A4mm Safety Banana4mm Safety Banana
MainsCPL M3 32A3 line - 32A4mm Safety Banana4mm Safety Banana
MainsCPL M5 32A5 line - 32A4mm Safety Banana4mm Safety Banana
UnscreenedCPL T22 line - balanced4mm Safety Banana4mm Safety Banana
UnscreenedCPL T4 RJ114 line - balancedRJ11RJ11
UnscreenedCPL T8 RJ458 line - RJ45RJ45RJ45
ScreenedCPL S8 RJ458 line - RJ45RJ45RJ45
ScreenedCPL USB-CUSB USB-BUSB-A
ScreenedCPL USB-PUSBUSB-AUSB-B
ScreenedCPL USB 3.0-CUSBUSB-B 3.0USB-A 3.0
ScreenedCPL USB 3.0-PUSBUSB-A 3.0USB-B 3.0
ScreenedCPL HDMIHDMIHDMIHDMI
UnbalancedCPL AF22 line - unbalanced4mm Safety banana4mm Safety banana
UnbalancedCPL AF33 line - unbalanced4mm Safety banana4mm Safety banana
UnbalancedCPL AF44 line - unbalanced4mm Safety banana4mm Safety banana

Many of the standard RadiCoupler®

RadiCoupler®
RadiAmp®

CI Test Bundle | 9 kHz - 400MHz @ 150W

Conducted Immunity Test Bundle

RadiAmp®

CI Test Bundle | 9 kHz - 250 MHz @ 75W

Conducted Immunity Test Bundle

RadiCoupler®

The international standard IEC 61000-4-6 covers conducted immunity requirements,  which prevent the influence of radio frequency signals to electrical and electronic equipment. In order to perform conducted immunity testing on an EUT (Equipment Under Test) with several types of connecting cables each with its own set of connectors, different Coupling Decoupling Networks are needed.

Coupling and Decoupling networks

RadiCoupler® Custom made!

Is your EUT connector not present in list above? No worries! Raditeq can develop the CDN that matches your needs. Let us know which connector you need and Raditeq will customize the RadiCoupler® to your preference and satisfaction!