Raditeq | FAQ
FAQ Categories
Find you Answer!
Welcome to the Raditeq FAQ page! Whether you’re a new customer or a seasoned user, this section is designed to help you find answers to common questions about our products, services, and technologies. Troubleshooting has never been easier as we’ve compiled the most frequently asked questions to ensure you have all the support you need. If you don’t find the answer you’re looking for here, our dedicated support team is always ready to assist. Explore below and get the insights you need to make the most out of Raditeq’s cutting-edge solutions!
Search your question
RadiCentre | Modular Test Systems
The RadiCentre® (Pro) uses a hardware interlock plug (6,3mm ¼” stereo jack) which can be used as a safety interlock. The hardware interlock plug provides two floating contacts which require connection for the system to operate. By default the supplied interlock plug is shorted and must be inserted into the interlock input at the back side of the RadiCentre®. When used with an external interlock system, like a door switch, the wires need to be connected in series with your interlock system and/or emergency stop circuitry. In this case, please cut the RED wire and connect the open ends to your interlock system.


CTR1004 | CTR1009 | When all mains cables are connected and the mains switches are set to “ON”, simple touch the front screen of the RadiCentre®.
CTR2008A | When using a RadiCentre® CTR2008A press the “on” button on the front of the RadiCentre®
CTR1001S | When using a RadiCentre CTR1001S (single slot). Simply turn on the mains


The firmware update for the RadiCentre® can be found here: www.raditeq.com/softwareupdate
On this page you can also find the Installation guide to help you perform the update!


When the RadiCentre® is turned on buy a beeping sound can be heard it means that the Interlock plug has been tripped. This can be intentionally in the case that the interlock is connected to a safety lock on an EMC chamber door or because due to the Interlock plug not being plugged in.
Plug in the Interlock plug to stop the beeing set the RadiCentre® to a state in which the it can be used for testing and measurements.


General Questions
Request general information
If you have general questions about all products or our service surrounding them please leave a question here or mail us!