Raditeq | FAQ
FAQ Categories
Find you Answer!
Welcome to the Raditeq FAQ page! Whether you’re a new customer or a seasoned user, this section is designed to help you find answers to common questions about our products, services, and technologies. Troubleshooting has never been easier as we’ve compiled the most frequently asked questions to ensure you have all the support you need. If you don’t find the answer you’re looking for here, our dedicated support team is always ready to assist. Explore below and get the insights you need to make the most out of Raditeq’s cutting-edge solutions!
Search your question
RadiGen | RF Signal Generators
The Ford FMC1278 standard requires pulse modulation using a packet of 50 pulses every second with a pulse duration of 3 µs and a pulse repetition rate of 300 Hz. This complex Radar Pulse packet can be generated with the RadiGen signal generators using the ‘Gated Pulse Modulation’ function.
This is a common problem with signal generators using step attenuators at the output stage. During changing of the RF carrier level, these step attenuators can cause unwanted overshoot (glitches) at the output signal, which could cause damage to the EUT or RF amplifier in the EMC test setup. The RadiGen uses a fully solid-state RF output design without step attenuators, resulting in a 100% monotone output signal without any unwanted overshoot and glitches.
General Questions
Request general information
If you have general questions about all products or our service surrounding them please leave a question here or mail us!