The RadiPower® 4000 series – the RPR4006R is the first member of power meters, offering excellent true RMS measurement and accuracy even at low power.
True RMS
To ensure accurate power measurement of non-sinusoidal RF signals over the entire measuring range,
the RadiPower® 4006R uses a true RMS detector. This detector leads to a DC voltage proportional to the RF RMS
value of the input signal, resulting in higher accuracy and faster measurements.
High dynamic range & speed | The RadiPower® RPR4006R offers a high dynamic range of up to 80 dB over the
frequency range from 4 kHz to 6 GHz, maintaining its high measuring speed over the entire input power range.
With measurement rates of up to 5 MS/s, fast true RMS power measurements become reality.
Accuracy
The RPR4006R power meter offers improved accuracy of +/- 0.2 dB over the complete frequency
range, and with active input ranging, the error contribution for non-sinusoidal signals with a high crest factor is
less than 0.2 dB. The input VSWR of the power meter is optimized to minimize measurement uncertainty, making
the RadiPower® 4000 series better for accurate RF power measurements.
Ruggedized housing | The RadiPower® RPR4006R uses a
robust, specially treated, aluminium housing with good RF
shielding and a sleek industrial appearance.
Easy to use
The power meter is easy to use, equipped with
a USB interface that allows direct connection to a Windows
PC. and can be controlled by “RadiMation®”. The software for
EMC immunity testing.
Software support
The RadiPower® RPR4006R power meter is compatible with Raditeq’s EMC immunity testing
software, “RadiMation®,” for convenient control and operation. Additionally, the RPR4006R can be utilized with
any other software that employs the instrument command codes specified in the manual. Driver availability is
accessible upon request.
Raditeq B.V. offers a standard warranty term of three (3) years on their products, calculated from the shipping date, under the condition that the product is registered on www.raditeq.com. For registration of the product, the customer should provide the product model, serialnumber and the responsible reseller (if applicable). If the product is not registered, a limited warranty term of one (1) year will be applicable.
Return Material Authorization (RMA) & Warranty repair
If a defect occurs to our product within the warranty term, a Return Material Authorization (RMA) ‘Warranty Repair’ request can be issued using the RMA link at www.raditeq.com/support. Upon receipt of the request, an RMA number will be provided. Please do not send the product without this RMA number! The defective product should be shipped to our service department at the following address:
Raditeq B.V. – Service Department
Vijzelmolenlaan 3
3447GX WOERDEN
The Netherlands
There will be no charge for repair services (materials or labour) within the (extended) warranty term.
These warranty terms are not applicable to:
Repair services on products that are not covered by the Raditeq warranty will be charged to the customer.
Repairs outside warranty
If a defect is not covered under warranty, an RMA fixed-repair can be ordered on the RMA link: www.raditeq.com/support If a re-calibration is needed after repair, this calibration should be ordered separately. The calibration will be performed at the ISO17025 accredited calibration laboratories of DARE!! Calibrations, based on the applicable service code / prices.
Warranty after repair
For repairs outside the original warranty period, a limited warranty of six months is applicable on the performed repair. Shipping conditions are the same as with repairs that are covered within the original warranty period.
Shipping
The customer will need to arrange shipping and cover for the costs (like e.g. transportation costs, duties, taxes) for sending the defect product the service department of Raditeq in The Netherlands. Raditeq will arrange the courier and cover for the costs for the return shipment after repair.
Please contact if we do not cover your industry.
E2000 Connector Saver Assembly
Factory calibration, field probe 10 GHz
Factory calibration, field probe 18 GHz
