White Paper
Electric Magnetic Field Combining | White Paper
Electric Magnetic Field Combining | This white paper discusses Electric Magnetic (EM) Field Generation in the 1 to 6 GHz frequency range using field combining.
19 July 2021
Raditeq always tries to improve the EMC/RF branch and will report on this and other newsworthy information to you on this page.
Electric Magnetic Field Combining | This white paper discusses Electric Magnetic (EM) Field Generation in the 1 to 6 GHz frequency range using field combining.
Compression measurements on EMC amplifiers | When performing EMC immunity tests, the linearity of the used RF power amplifier must be checked at all applicable
How to define speed in E-Field Probes Most datasheets show a specification about measurement speed of E-field probes. But in practice, speed is often defined
Measuring isotropic field strength Isotropic Electric field probes generally make use of 3 antennae, orientated in the X-, Y and Z direction. The effective field
Measurement Speed versus Measurement Accuracy: which is more important? Accuracy goes before speed! Measurement Speed versus Measurement Accuracy | Some manufacturers of E-field probes underline
Consequences of non-isotropic behaviour of E-field Probes Isotropy much more important than previously thought! Importance of Isotropy | The ongoing discussion about the measurement accuracy
Isotropic importance of Isotropic behavior, the forgotten specification Isotropic importance | EMC testing labs use electric (E-)field probes to determine the electric field strength generated
How to increase accuracy in field strength measurements User corrections and how to apply them. Every wide band field strength sensor will have some frequency